當前位置:係統粉 >  係統教程 > Win8係統教程 >  命令行創建win8啟動盤

命令行創建win8啟動盤

時間:2015-04-16 來源:互聯網 瀏覽量:

   管理員身份運行cmd,輸入diskpart

  DISKPART>

  然後依次輸入:

  list disk

  select disk 1

  clean

  create partition primary

  active

  format fs=fat32 quick

  assign

  exit

  然後將安裝鏡像所有文件拷貝進去

  如果不能正常啟動,則使用修複命令:I:BootBootsect.exe /NT60 I:

  Gone are the days, when we used to burn CD and DVDs to install operating systems. Now all modern operating systems lets you install using PEN Drive / USB Storage Device / USB Stick. And this article describes step by step guide to format and create bootable Windows Vista / Windows 7 / Windows 8 USB Stick.

  Prerequisites:

  Windows Vista / Windows 7 / Windows 8 ISO or installation files

  A 4GB USB 2.0 Storage device (Its recommended to use USB 2.0 or USB 3.0 device for optimal performance)

  How To:

  Plug your USB storage device. and run Command Prompt and execute the following commands one by one.

  Diskpart

  Run Disk partition utility

  List disk

  To get disk index that is used to perform disk partitioning.

  Select disk n

  Selects disk n to perform disk partitioning. n is the number for your USB flash drive you obtained from above command.

  Clean

  Flush your existing all USB drive's partitions.

  Create partition primary

  Creates a partition as primary partition.

  Active

  Set the partition as active to hold bootmgr.

  Format FS=NTFS QUICK

  Perform a quick format on the USB Flash drive

  Assign

  Assign a drive letter to the partition

  Exit

  To quit Diskpart utility

  Now copy all setup files to USB storage device… and that's All.

  Re-boot your PC with it, you will be able to boot and install Windows Vista/Windows 7/Windows 8 using USB Stick.

  Note: If you face any trouble to boot with it or unable to boot, try this FIX.

  I:BootBootsect.exe /NT60 I:

  Where I: is the drive letter of USB Stick

我要分享:
版權信息

Copyright @ 2011 係統粉 版權聲明 最新發布內容 網站導航